Product Code :441-Seri Colors:Besides our standard color catalog, requested colors can also be made Definiton:Air drying alkyd resin based glossy topcoat paint which has very short dust free drying time.
Application Field : It is used before the air drying topcoat paints on all kinds of iron and steel surfaces. It has widespread use on painting agricultural equipments steel goods and hand tools, metal components of automotive supply and heavy construction equipments.
Density (20°C , gr/cm³ )
0,98 - 1,38 (Depends on color)
Drying Time (20°C)
Touch dry: 15-20 minutes
Thoroughly Drying : 7 days
44,0 - 54,0 (Depends on color)
Rapid Industrial Thinner (941-0412)
An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 40-45 microns (excluding application loss)
Application Method: ÜNLÜ RAPID INDUSTRIAL PAINT should be applied on dust and oil-free etc. dry metal surfaces. Suggested thinner amount is added until homogeneous mixture obtained and is applied on RAPID INDUSTRIAL PRIMER (442-series). The application can be done as wet-on-wet or it has to be sanded slightly if the application time is over 72 hours between the coats.
Things To Watch Out For:
In the system due to the presence of volatile and flammable solvent adequate air ventilation in the workshops, avoid from naked flame and high temprature. Stir well before using. Do not forget the package cap open. During application and curing, temperature must be in the range of 10°C-35°C and relative humidity is required not to be above 70%. For suitable application conditions, paint temperature should not fall below 12°C. The temperature of the surface of the material should be at least 3ºC above the dew point to not to observe a condensation in paint.